English  |
6060001207
Epiroc
6060001207
Hello, Mine Owners and Maintenance Chiefs! I am the supplier who specializes in solving problems for Epiroc rigs—like "blocked air lines," "weak impact," and "excessive air consumption." Today, I’m recommending a "component that brings your D65 rig back to life"—the Dedicated High-Pressure Pneumatic Control Valve for the FlexiRoc D65.
Anyone running an Epiroc drill knows these machines are sophisticated, and the pneumatic system is precise. If this valve fails, the DTH hammer loses power. Many so-called "universal valves" on the market look like they fit but are made of ordinary cast iron, with poor airtightness and high-pressure drop. Installing them on a D65 results in a "strong horse pulling a weak cart": the engine roars, but the DTH hammer is soft and sluggish, failing to penetrate hard rock while wasting fuel and air. Our valve is specifically engineered for the FlexiRoc D65. It doesn't just pass air; it passes full volume, precise control, and durability. Choose us to restore your rig's "factory-installed explosive power," ensuring every cubic foot of compressed air is used effectively!
Brass + Alloy Steel Composite Structure: No Bursts Under High Pressure:
The D65 operates at extremely high air supply pressures; ordinary valves can't cope.
Valve Body: Made from Forged Brass. Brass offers superior airtightness, won't rust, and dissipates heat quickly. Forging ensures a dense internal structure capable of withstanding repeated shocks from high wind pressure in mines—guaranteed not to crack or leak.
Valve Spool: The core moving part is high-strength alloy steel. This material is extremely hard and wear-resistant. Even in compressed air carrying sand particles, it performs tens of thousands of cycles without dimensional change or sticking.
High-Wear-Resistant Seals: Not a Whisper of Leakage:
Air valves fear internal leakage; any leak means lost pressure.
Seals: We use import-grade specialty rubber seals. These materials resist high pressure, high temperatures, and oil mist from the compressor.
Performance: Once installed, airflow switching is crisp and clean. When open, air flows vigorously to the DTH hammer; when closed, it seals dead tight. This ensures the DTH hammer receives full working pressure, naturally restoring its impact frequency.
Perfect Match for D65 Air Lines: Zero Modification Installation:
Many inferior parts have dimensional deviations, causing binding or total leakage.
Precision: Our valve's mounting holes and air port diameters strictly adhere to D65 system specifications. You receive it, remove the old one, bolt on the new one—holes align perfectly, and fittings connect securely.
Compatibility: Fully adapts to the FlexiRoc D65's pneumatic control system and hammer supply circuit. No electrical changes, no pipe modifications—replacement takes about half an hour.
Built Tough: Ignores Mining "Grime":
Mine dust is heavy, and compressor output can be dirty.
Vibration Resistance: Internal structures are optimized; springs won't loosen, and parts won't detach under high vibration.
Adaptability: Even if the compressor carries a bit of moisture, our seals won't swell or stick.
Parameter | Specification |
|---|---|
Product Name | Pneumatic Spool Valve / Pressure Regulator / Hammer Supply Valve |
Core Materials | Forged Brass Body + High-Strength Alloy Steel Spool |
Compatible Model | Epiroc FlexiRoc D65 Series Drill Rigs |
Working Pressure | Adapted for High-Pressure DTH Drilling Systems |
Key Properties | Zero Leakage, High Response, Wear Resistant, Vibration Proof |
FlexiRoc D65 Rigs: Replacing aging main supply valves to restore DTH hammer impact power.
High-Pressure Drilling: Ensuring stable high-pressure airflow to the impactor in hard rock formations like granite and iron ore.
Pneumatic System Repair: Solving "slow drilling" and "difficulty retracting" caused by internal valve leakage.
Ready to Ship, Exact Fit: If it's a valve for the D65, we have the correct unit ready. You don't need complex part numbers; just tell us which location is faulty, and we'll ship the right one immediately.
Power Restored Upon Installation: We guarantee that after installing our valve, the DTH hammer sound becomes crisp and powerful. If it remains weak or leaks, we replace it.
Value for Money: We don't sell the cheapest, because they fail, leak daily, and the cost of one day's downtime is enormous. We sell the most worry-free. Do the math: using our valve lowers air consumption and raises penetration rates—you'll earn back the valve cost quickly.
A Quick Tip for the Mechanics:
Brothers, pay close attention to this detail during installation:
Depressurize! Before replacing, ensure the main air line pressure is fully vented. High-pressure air can sever fingers; never work under pressure.
Blow Out Lines. After removing the old valve, blow out rust and water from the air lines. Dirty debris entering the new valve will cause sticking.
Apply Grease. Put a tiny amount of vaseline or specialized lubricant on the spool and seals. This ensures smooth installation, better sealing, and longer life.
Test Run. After installation, don't rush to drill. Run the compressor and listen for leaks. Confirm everything is correct before tackling hard rock. Safe travels home are what matter most!
